Repair and replacement of Chimney Damper System

Almost every fireplace requires a damper, whether your chimney has a throat damper or sealing damper. Any damper will stop your heat and cold air from escaping when you’re not using your fireplace. If your fireplace doesn’t have a damper, it would not be easy to maintain a constant temperature within a house.

You ensured that your damper was operating correctly, which is necessary to keep your home warm and push acidic smoke outside. So, if your fireplace is ventless, you must have an expert understanding of dampers before operating it in this winter. Moreover, a fragmented or damaged damper will affect how proficiently and carefully your fireplace operates.

Our experts at Pros On-call know everything regarding the chimney damper system. We specialize in repairing and replacing the chimney dampers in your home.

Need of Chimney Dampers 

When it comes to the numerous divisions that make up a chimney, every part has its specific and significant role. Studying each of these is critical for considerate how to make the fireplace run as effectively as possible. One part which will make the structure and maintaining the fires much easier is the damper. These materials support fireplace owners in numerous means. Check out the list of benefits that they may offer!

• Keeps the cold air out
• Dampers send smoke away
• Control the strength and intensity of fire

Types of Chimney Dampers

The damper plays an essential role for chimneys both through the winter when you use the fireplace and, in the summer, when it’s not in use. Initially, the damper is used to eliminate the smoke from the flue. However, suppose the damper isn’t open when starting the burning wood. In that case, you’ll know the appropriate way because the smoke is essential during the summer as well because, with the environmental changes joint with the AC, the hot outside air will be dragged into your home through the chimneys.

The damper will hold that from happening and reducing your home’s energy efficiency. There are two types of chimney dampers recommended by us that you should install in your home.

1. Throat damper

The initial and leading sort of damper is a throat damper, and it is usually found in old kinds fireplaces. This damper is set directly over the chimney opening. It’s generally developed of all together chimneys. This damper is put right over the chimney opening. It’s comprised of cast iron, steel, or treated steel. It appears to be equivalent to a secret entryway as it has a cover that folds over a track.

It’s normally constrained by something which seems like poker or by hitch that is changed to open or close the damper. At the point when the damper closes, it frames a metal-to-metal seal. This kind of damper is the assortments, especially cast-dampers, license erosion and other water harm.

They’re acceptable in preventing the health issues and trash out from the chimney; yet, they’re just 70% productive at prevention of airflow when the damper is closed. As it is placed so close to the chimney extreme heat, they could eventually wrap and no longer want the important barrier required.

2. Sealing Damper

The primary type of damper is a top-selling damper also called as top-base damper. This kind of damper sits on the top of the furnace instead of inside it. It’s the identical as a funnel cap but also gives other advantages as well. If the damper is open, it keeps the trash, damp, and animal out.

When the damper is closed, it makes a much stronger seal than goes under the flue to the firebox so that it could simply open and shut down. As a result, a sealing damper is far more effective in terms of energy and holds the moisture out of the whole chimney as well.

What if the chimney damper isn’t working properly? 

If your damper isn’t working efficiently, there are several reasons behind that. One of the common causes your damper may be possessing difficulty is due to wreckage building-up and creosote build-up inside the chimney. If your damper is molded for certain reasons, it may not be capable to open and close correctly. You should hire a good cleaning service provider.

Another reason your damper may not be working efficiently because it doesn’t work for your chimney quite right. Discovering a damper that is suitably sized for your particular chimney is necessary for operating. This will assure a close-fitting seal when fires are not ignited and provide easy burnt when needed.

Maintenance Cost of a Chimney Damper System? 

If your chimney damper won’t open, it’s likely to be damaged soon, or debris is blocking it from the inside the flue. In addition, it is very challenging and hazardous to have a wood or gas fire in the fireplace with a partially operated damper. So, if you’re assuming any problems, you immediately require professional assistance by Pros On Call.

The repair and maintenance cost depends upon the seriousness of the problem. If you’re worried about your system, or it’s been over a year since your previous chimney service, so don’t wait to call us today to schedule your inspection and repairing.

Hire Pros On Call For The Job!

Pros On Call set you up a real chimney damper at your fireplace. Our team of experts are trained and certified in chimney damper systems and can benefit you make the right decision according to your home. We are also certified in chimney sweeping so, should extra debris be blocking belongings up, we can do a thorough cleaning.

If you’re facing any issues while opening your chimney damper system or not sure about its safety, call us to schedule an appointment!