- Texas License #B19847
- Family Owned Since 2010
- Texas Markets 36
- Response · Central TX approx 14 min
- Dispatch 24 / 7
- Google Rating 4.9 / 5
ELECTRIC STRIKE SERVICES WE HANDLE
-
Strike Repair
Solenoid burnout, keeper misalignment, voltage drift, and wiring faults on existing installations.
-
New Installation
Retrofit or new-construction electric strikes on steel, hollow-metal, and aluminum storefront doors.
-
Access Control Integration
Wire and configure strikes as the output device for card reader, keypad, and intercom systems.
-
Code Compliance
NFPA 80, NFPA 101, and Texas Fire Code configuration. Fail-safe and fail-secure settings to match your occupancy type.
HOW ELECTRIC STRIKE SERVICE WORKS
-
Call or Send a Request
Describe the door type, access control system, and what the strike is doing. We ask about voltage, brand, and frame material so we can bring the right parts on the first visit.
-
Assess and Voltage-Test
On site, we measure supply voltage under load, check frame alignment, and test access control wiring continuity. A voltage reading that looks good at the panel can sag to unusable levels at the strike.
-
Source and Quote
We specify the matching strike by geometry, voltage, fail-mode, and frame prep requirements. Written quote provided before any work begins.
-
Install and Verify
Strike mounted per manufacturer template. Keeper alignment set and torqued. Fail-safe or fail-secure mode confirmed. NFPA egress behavior tested before we leave.
THE SETTING THAT MATTERS MOST
Fail-Safe vs Fail-Secure: Getting the Mode Right the First Time
When a building loses power, a fail-safe electric strike unlocks. That is the correct behavior for any door on a fire egress path, a fire-alarm circuit, or a main exit corridor. NFPA 101 Life Safety Code requires that egress paths remain passable during a fire event, which means cutting power to the strike must open the door, not lock it.
Fail-secure does the opposite: the door stays locked when power is cut. Server rooms, data closets, pharmacies, and interior secured areas typically use fail-secure. A power outage in a data center is not a fire emergency. Keeping the room locked during an outage is the right call. The mistake we see most often on retrofitted systems is fail-secure strikes installed on corridor doors that should be fail-safe. A fire marshal will catch it. We catch it first.
- Fail-safe: egress corridors, fire doors, main exits
- Fail-secure: server rooms, pharmacies, data closets, secured interior areas
- NFPA 80 fire door assembly compliance verified at installation
- Voltage measured under load, not just at the panel
12V / 24V
Most common supply voltages. Wrong voltage is the leading cause of early solenoid failure.
36 markets
Texas cities where Pros On Call provides commercial electric strike service.
Since 2010
Texas-licensed commercial locksmith
Texas DPS License #B19847 · Bonded · Insured
ELECTRIC STRIKE TYPES: COMPARE YOUR OPTIONS
| Strike Type | Best Application | Fail Mode | Typical Hardware Cost | Retrofit Feasibility |
|---|---|---|---|---|
| HES 1006 Series | Cylindrical knob/lever lock, offices, retail | Fail-safe or fail-secure (jumper selectable) | $120 to $280 | High - drop-in for most existing frames |
| Von Duprin 6210 / 6300 | Paired with Von Duprin 99/98 panic hardware | Fail-safe (fire door default) | $180 to $350 | Medium - requires specific panic hardware geometry |
| Adams Rite 7400 Series | Aluminum narrow-stile storefront doors | Fail-safe or fail-secure | $150 to $300 | High for aluminum storefronts, not for steel |
| SDC 45U Series | Access control integration, multi-tenant lobbies | Fail-safe or fail-secure (model-specific) | $200 to $400 | Medium - wiring configuration required |
| Folger Adam | Correctional, government, heavy-duty applications | Fail-secure (default for this tier) | $300 to $600 | Low - built for specific frame preps |
| Trine 3000 Series | Budget commercial, light industrial, multi-family | Fail-safe standard | $80 to $180 | High - wide frame compatibility |
Customers, on the work
Texas reviews.
Five-star work, in the customers' own words. No edits, no filters.
-
I had “Pros On Call” change the locks on my home that I recently purchased. It was easy to get a hold of them, they made an appointment quickly and did a great job for a fair price. I had them come out about two weeks later and put a deadbolt lock on my front door as well and again - easy to get a hold of, they had to order an aged bronze deadbolt lock 🔐 but once it arrived they came out quickly, did a great job, were neat and it was a fair price. I highly recommend “Pros On Call” for all of your Locksmith needs! 5 Stars ⭐️ ⭐️ ⭐️ ⭐️ ⭐️ for sure!!
Read more on Google -
This guy come and help me at the last moment and be very professional and fair price
Read more on Google -
Josh was amazing! I called him when I was locked out of my car, and he arrived within 20 minutes. He was professional, fast, and had my car unlocked in no time. The whole process was stress free, and his pricing was fair. I really appreciate how quickly he came to help. Highly recommend Josh if you ever need a reliable locksmith!
Read more on Google -
Josh was awesome, he came to the rescue and I didn’t have to wait longer than 30 minutes in total. He also was incredibly kind and understanding of my situation. Dropped off my kids, and somehow my key fab went missing! Also gave me a discount!!
Read more on Google -
It sucks they charge an inconvenience fee of 49.00. Which I wish you would have mentioned this on our intial call. Transparency would have been to say hey we charge an inconvenience fee. Never once was this mentioned. When we spoke with the representative all she said was the locksmith will call you with a price. Never once did she say we take your payment info so we can charge you an inconvenience fee. If that was mentioned then this would have been handled differently. She made it seem like we need a card on file to help. Then they attempted to debit my card twice for two separate transactions for 49.00. I understand you run a business. But transparency is key. I specifically asked her what I would be charged for never once did she mention this. Lesson learned. Update***she reached out in regards to my Google review. Although I attempted to resolve per phone call. Shameless.
Read more on Google -
Great service Ermi took less than 2 minutes. Thank you so much!
Read more on Google -
Excellent service and high quality items! Roland was able to get me this key fob AND program it for a great price. Rechargeable fob is a lot more convenient than having to replace the battery every time it dies. Thank you !
Read more on Google -
I have been a customer of pros on call for like over 2 years about and have had to call on them about 6 times. I had used several other locksmith in the prior 15 years but once Roland , one of many these pros came over I never use sny other locksmith service. I am very happy with this company I usually asks for Roland because I know him best and I have developed a kinda professional friendship with him but you can't lose no matter who it is that helps you. All top notch pros. I have called days and night. I am elderley snd lost my keys and I had some stolen. I would tell anyone that ask to call this company. You won't find any better. Here are a few keys Roland msde for me. I have 3 cars an a home. I have to locate my home keys do I didn't have the opputunity to take a picture of them but these here are greal examples.
Read more on Google -
Super great experience! Roland was very fast at getting to where I was. Overall he did an amazing job! Plus super affordable prices, you can't beat that! 10/10
Read more on Google -
Locksmith Roland provided exceptional service at a affordable price point, and I highly recommend both the individual and the company. 💯
Read more on Google -
I had Zach come out to the property that I purchased out in Luling, Texas. It’s about 10 acres, and it has a garage with a corroded lock. Out of all the companies I have called, which is roughly 5 to 6. He was able to take my call, head out the next day, and take care of the corroded lock I need fixed on my property. He was extremely professional and helped me by giving me instructions on how to operate the lock as well! I’m in the military and not able to be in the area, so he was very understanding and professional. Highly recommend!
Read more on Google -
Josh was amazing!!! Got us back up and running with two new key fobs in less than 30 mins. He definitely knows his business and has the experience. Got a great deal and I will definitely be calling him the next time we are in need of assistance again. Thank you, Josh!
Read more on Google -
Josh was a really good technician fast and prompt.... If this ever happens again (hopefully it doesn't )I'll be calling him.
Read more on Google -
Zach got to me asap and even called to make sure we were communicating the right location of my truck! Within 10 minutes it was open and running! He’s the man! Thank you so much for the quick turnaround!
Read more on Google -
Their response time was great. Orlando did a great job. No replacement parts were needed and repairs took an hour. I was badly disappointed at the high bill, even with a military discount. Maybe that is why I couldn’t get an approximate estimate before Orlando came. Bottom line : good work, too expensive
Read more on Google -
Very helpful and super friendly. They were able to unlock my door in minutes at an affordable price! Even offered spare key services!
Read more on Google -
Miguel was very professional and efficient in his work he was very easy to work with and quick in doing his job
Read more on Google -
The locksmith was quick and very efficient, got me back on the road on no time!
Read more on Google -
He was very fast, was able to make me a key and a spare when I was stranded
Read more on Google
Pricing for this service is custom-quoted
Specialty work like this depends on parts, building type, and scope. Call for a precise price or send the details and we will quote within the hour.
Licensed #B19847. Free phone quotes.
ELECTRIC STRIKE QUESTIONS
How much does electric strike repair cost?
Solenoid replacement or keeper realignment typically runs $150 to $350 for parts and labor. Full strike replacement on an existing frame runs $250 to $600 for the strike plus $150 to $250 labor, depending on the brand, voltage, and frame condition. Aluminum storefront frames often require additional prep work, which adds $100 to $200. We give you a written scope and price before any work starts.
How long does electric strike installation take?
A straightforward replacement on a steel hollow-metal frame takes two to three hours. New installation with conduit run for the low-voltage wiring adds another one to two hours. Aluminum storefront narrow-stile frames take longer because the hardware geometry is more constrained. We can handle most single-door installations in a half-day service call.
Which electric strike brands do you carry and service?
We stock and service HES (Allegion), Von Duprin, Adams Rite, RCI, Trine, SDC, and Folger Adam. HES and Von Duprin cover most Texas commercial specs. Adams Rite is the right call for aluminum narrow-stile storefronts. Folger Adam handles correctional and government-grade applications. If your building already has a specific brand installed, we match it so the wiring, voltage, and keeper geometry stay consistent.
Does an electric strike need to comply with fire code?
Yes, when it is installed on a fire-rated door assembly. The strike must be UL-listed for the door's fire rating, and the fail-safe or fail-secure setting must match the occupancy type. NFPA 80 governs fire door hardware specifications. NFPA 101 Life Safety Code governs egress behavior. If your door is on a fire-rated corridor, stairwell, or tenant separation wall, the strike needs to be properly rated and configured. We verify the door label before ordering hardware.
Fail-safe vs fail-secure: which setting should my building use?
Fail-safe means the door unlocks when power is cut. Use this on egress paths, fire exit corridors, and any door on a fire alarm circuit. If the building loses power, people can still get out. Fail-secure means the door stays locked when power is cut. Use this on data closets, server rooms, pharmacies, and areas where security matters more than unrestricted egress. Most commercial buildings use fail-safe on corridor doors and fail-secure on interior secured rooms. We configure the correct mode at installation.
Can a property manager or facility director install an electric strike themselves?
Technically possible on a simple non-rated door, but there are real risks. Wrong voltage wiring will burn out the solenoid within weeks. Wrong fail mode on a fire-rated door is a code violation. Keeper misalignment causes the latch to bind or miss entirely. A licensed commercial locksmith installs to manufacturer specs, verifies voltage under load, tests egress behavior, and documents the work for your building file. That documentation matters at your next fire marshal inspection.
Do you service electric strikes after hours?
Yes. We operate 24/7 across all Texas markets. After-hours service carries a surcharge of $75 to $150 depending on the time and location. If a strike fails and an entry door is unsecured overnight, that is an emergency we treat as same-day priority. Call (888) 601-6005 any time.
PUSH-BAR AND PANIC HARDWARE
Push-bar and panic hardware we install + service
- We install + service Von Duprin
- We install + service dormakaba
- We install + service LCN
- We install + service Adams Rite
All brand names and logos are trademarks of their respective owners. Pros On Call is an independent locksmith and security service provider. Brand references indicate products we install and service and do not imply affiliation, endorsement, or authorized dealer status unless explicitly stated.
Request commercial locksmith service
Master key systems, panic hardware, electric strikes, high-security locks, and rekeys. We scope it and follow up.
(888) 601-6005Strike Failing? Door Unsecured? We Handle It Same Day.
Texas-licensed commercial locksmiths, License #B19847. We assess, source, install, and verify. Call for a site assessment or emergency response.
Call Now: (888) 601-6005Licensed & Insured · License #B19847 · Average 30-min arrival
RELATED COMMERCIAL SERVICES
-
Panic Hardware
IBC and NFPA 101 compliant exit device installation. Rim, mortise, and vertical rod devices.
Learn More About Panic Hardware -
Commercial Access Control
Card reader, keypad, and credential-based access for commercial entry points across Texas.
Learn More About Commercial Access Control -
Master Key Systems
Key hierarchy for multi-tenant buildings, property managers, and tiered-access facilities.
Learn More About Master Key Systems -
Restricted Keyway
Proprietary GMS MX cylinders. No one can duplicate your keys without our authorization.
Learn More About Restricted Keyway